| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-65.2. DISCONNECT CLUTCH ASSEMBLY - ANCHOR WINCH - MAINTENANCE INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
2. Check clearances between
the heads of the driving
pins and the driving
slots in the mating
intermediate plate by
placing the intermediate
plate over the pins,
making certain the plate
fits freely before the
clutch is assembled to
the engine. If excessive
clearance between the
slots of the intermediate
plate and the driving
pins exists, new parts
should be installed.
3. Try the clutch in the
engine flywheel before
installing driven discs
and intermediate plate
to make certain clutch
pilot diameter is a free
fit in the bore of the
flywheel.
j.
Inter-
Install.
When installing
mediate
the intermediate
plate
plate, be certain
(24)
its rotation will
be in the direc-
tion of the arrows
appearing on one
side of the plate
near the bore.
5-846
|
||
|
||
