| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-66. TORQUE CONVERTER - ANCHOR WINCH - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
11. Basic
group
Extreme care must be exercised in assembly to make certain
that the lapped surfaces of the carbon mating ring and steel
nosepiece are free from all particles of dust or grit as this will
result in scratches on the lapped surfaces and cause fluid
leakage. These surfaces are originally lapped smooth within
twelve millionths of an inch.
a. Bearing
1. Hand pack with
(92)
grease.
2. Press into turbine
housing (31).
3. Block bearing on
press .
b. Turbine
1. Check for proper
wheel
positioning of
(91)
the carbon mating
ring (105), and
washer (104).
2. Press into turbine
housing (31).
5-888
|
||
|
||
