| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-11
5-71.
BLOWER - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY (Cont)
2. Start the oil seal
straight into the
bore in the end
plate with the
sealing edge facing
down (toward the
bearing bore).
3. Place the short end
Use tool J6270-3.
of oil seal remover
and installer in the
oil seal and under
the ram of the press.
Then, press the oil
seal into the end
plate until the
shoulder on the
installer contacts
the end plate.
5-993
|
||
|
||
