| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-11
6-6. ELASTOMERIC COMPENSATING WINCH - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
c. Drum weldment
Turn large end of drum to
(1)
the up position.
d. Shim (2)
Insert shim into bore of
the drum with clearance
holes fitting over the
exposed dowels.
e. Cogs (3)
Stack cogs on top of each
other in the center of the
drum. Rotate each cog
clockwise until the teeth
on all cogs engage with
each other.
f. Tortional
Place spring over cogs
Spring (4)
until clearance holes in
the end plate of the
spring fit over dowel
pins. Seat the end plate
of the spring against
the shim (2).
g. Inner mounting
Place mounting plate l11)
plate (5)
onto tortional spring and
measure the distance
between the top surface
of the lip and top surface
of the bearing mounting
surface.
IF .XX IS:
INSTALL ADDIATIONAL SHIMS
A)
.32 THRU .43
0
B)
.20 THRU .31
1
C)
.08 THRU .19
2
D)
.00 THRU .07
3
Figure 1.
Change 1 6-35
|
||
|
||
