| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-2
2-101.
PRESTART ADJUSTMENTS (Cont).
(17) Place the AUTO-CONTROLS switch (18) in the ON position.
(18) Lamp (19) wi11 be lit.
(19) Close strainer valve (20)).
(20) Close on-deck valve (21).
b. Forward Engine Room.
(1) Close strainer valves (22 and 23).
(2) Close on-deck valve (24).
c.
Aft Engine Room.
For initial system start-up connect the system to a
source of clean water. DO NOT connect to pressurized
source of water. Use a tank filled with clean water.
(1)
Place service hose in a tank of clean water.
(2)
Open on-deck valve (21).
(3)
Open intervessel shutoff valve (7).
(4)
Place the SUPPLY PUMP switch (25) in the ON position.
This fills the system.
(5)
Lamp (26) will be lit.
(6)
Observe sight glasses (27, 28 and 29) for water level.
(7)
Place the SUPPLY PUMP switch (25) in the OFF position.
(8)
Lamp (26) will go out.
(9)
Close on-deck valve (21).
(10) Remove service hose from tank of water.
(11) Place the AUTO-CONTROL switch (18) in the OFF position.
(12) Lamp (19) will go out.
2-561
|
||
|
||
