| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-2
2-104. EMPTYING HOLDING TANK.
The oil/water separator is used to empty the slop oil holding tank. Refer to FO-57 and proceed as fllows:
o
a. Aft Engine Room.
Check sight glass (1) on holding tank.
NOTE
Holding tanks will hold 125 gallons (473 liters).
b. On Deck (Port Side).
(1) Open on-deck discharge valve (2).
(2) Place a suitable container under valve.
c.
Aft Engine Room.
(1) Close inlet valve (3).
(2) Check that-valves (4, 5, 6, 7, and 8) are closed.
(3) Open suction valve (9).
(4) Place manual shutoff valve (10) in the OFF position.
(5) Place manual shutoff valve (11) in the ON position.
Change 4
2-567
|
||
|
||
