| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-3
Table 3-62. Anchor Winch Engine No Fuel or Insufficient
Fuel Troubleshooting (Cont).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
Faulty installation (Cont).
Step 2.
Check for inoperative fuel return line check lift valve.
Make sure that the check valve is installed in the line correctly; the arrow should be on
top of the valve assembly or pointing upward. If the valve is inoperative, replace it with
a new valve assembly. Refer to paragraph 3-147.
Step 3.
Check for high fuel return temperature.
Check the engine fuel spill-back temperature. The return fuel temperature must be less
than 150 (65.5 ) or a loss in horsepower will occur. This condition may be corrected
F
C
by installing larger fuel lines or using the fuel oil heat exchanger.
3-193
|
||
|
||
