| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-3
Table 3-66. Anchor Winch Engine Abnormal Engine
Coolant Operating Temperature Troubleshooting.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
Temperature above normal.
Step 1.
Check for insufficient heat transfer.
Clean the cooling system with a good cooling system cleaner and thoroughly flush to
remove scale deposits.
Step 2.
Check for poor circulation.
a. Check the coolant level and fill to the filler neck if the coolant level is low.
b. Inspect for collapsed or disintegrated hoses. Replace faulty hoses. Refer to paragraph
3-151.
c.
Thermostat may be inoperative. Remove, inspect and test the thermostat; replace if
found faulty. Refer to paragraph 3-153.
d. Check the water pump for a loose or damaged impeller. Refer to paragraph 3-150.
e. Check the flow of coolant through the keel cooler. A clogged keel cooler will cause an
inadequate supply of coolant on the suction side of the pump. Clean the keel cooler.
Refer to paragraph 3-151 and Direct Support Maintenance.
f.
The cylinder head must be removed and inspected for cracks and the head gaskets
replaced if combustion gases are entering the cooling system. Refer to paragraph 3-
163.
g. Check for an air leak on the suction side of the water pump. Replace defective parts.
Refer to paragraph 3-150.
3-203
|
||
|
||
