| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-4
HYDROSTARTER SYSTEM SPECIFICATIONS
HYDROSTARTER MOTOR
English
Metric
Number of pistons.......................... Seven
37.8 cm2
Displacement per revolution ............................................................ 2 cu. in.
Maximum torque at 3000 psi
99.1 nm2
(206.85 kPa) (20 Series) .................................................................. 73 lb. ft.
Drive.............................................. Overrunning clutch
ENGINE-DRIVEN PUMP
Type ............................................. Positive displacement
Number of pistons.......................... One
13.3 mm2
Displacement per revolution ............................................................ 0.0208 cu. in.
Maximum discharge pressure .......................................................... 3250 psi
22409 kPa
Maximum continuous speed .......... 2500 rpm
MANUAL PUMP
Type .............................................. Positive displacement
Number of pistons.......................... One
2
Displacement per stroke .................................................................. 0.773 cu. in.
498.7 mm
ACCUMULATOR
Type .............................................. Piston
2
Capacity ................................................................................ 200 or 300 cu. in.
1290 or 1935 cm
Precharge (nitrogen) ........................................................................ 1250 psi
8618.8 kPa
Operating pressure .......................................................................... 900-3000 psi
19996-20685 kPa
3-261
|
||
|
||
