| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-4
3-28. EXHAUST MANIFOLD - MAINTENANCE INSTRUCTIONS. (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
4. Exhaust
NOTE
manifold
(Right or
All traces of the old gaskets must be removed from
left)
the exhaust manifold and cylinder head.
a. Studs
Replace.
If necessary.
(22)
b. Gaskets
Place on studs in cylin-
Use new gasket.
(20 and
der head.
21)
c.
Exhaust
Place on studs, up
manifold
against gaskets.
(14)
d. Bevel
Install.
Draw manifold
washers
up to gaskets.
(19) and
nuts (18)
NOTE
Bevel washers should be set in position so that the outer dia-
meter will rest on the manifold and the crown at the center is
next to the nut.
e. Grabs
Install.
(17)
and
nuts
(16)
f.
Nuts
Tighten.
Torque to 30-35
(16 and
lb-ft (40.7-
18)
47.5 Nm).
NOTE
The exhaust manifold stud nuts should be tightened from the
center of the exhaust manifold outward, alternating towards
either end.
3-652
|
||
|
||
