| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-4
3-33.2. EXHAUST VALVE - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENTS (Cont)
h. Remove the valve bridge
and reinstall it in its
ORIGINAL position.
i. Adjust the remaining
valve bridges in the
same manner.
j. Swing the rocker arm
assembly into position,
making sure the valve
bridges are properly
positioned on the rear
valve stems. This pre-
caution is necessary to
prevent valve damage due
to mislocated valve bridges.
Tighten the rocker arm
shaft bracket bolts.
Torque to 90-100 ft-lb
(122-136 Nm) torque.
REMOVAL - CYLINDER HEAD OFF ENGINE
8. Exhaust
a. Cylinder
Place on 2 inch wood
Keeps cam fol-
valve
head
blocks.
lowers clear of
springs
workbench.
(4)
b. Exhaust
Place a 2 inch wood
valves
block under valves.
(10)
3-718
|
||
|
||
