| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-4
3-34. CYLINDER HEAD-MAINTENANCE INSTRUCTIONS (Cont.).
LOCATION
ITEM
ACTION
REMARKS
ASSEMBLY (Cont.)
NOTE (Cont.)
attaching a 1/8" (.3175 cm) diameter brass rod to a brush. After
cleaning, dry the cylinder head with compressed air.
WARNING
Use eye protection when using compressed air.
CAUTlON
Apply a small amount of "dual purpose" sealer to the threads of
the plugs only. Work the sealant into the threads and wipe the
excess with a clean lintless cloth so that sealant will not be
washed into the fuel and oil passages.
NOTE
Apply sealant to threads of pipe plugs 14, 20 and 21.
24. Cylinder
a. Pipe
Install seven plugs.
Tighten to (18-
head
plugs
22 lb-ft),
(21)
(24.4-29.8 Nm).
b. Pipe
Install seven plugs.
Tighten to (14-
plugs
16 lb-ft),
(20)
(18.9-21.7 Nm).
c. Pipe
Install four plugs.
Tighten to
plugs
flush or 1/8
(18)
inch recessed.
d. Pipe
Install thirteen plugs.
Tighten to (14-
plugs
16 lb-ft),
(14)
18.9-21.7 Nm).
3-748
|
||
|
||
