Custom Search
 
  
 
TM 55-1905-220-14-4
3-4. CYLINDER HEAD-MAINTENANCE INSTRUCTIONS (Cont.).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
bracket. Tighten the
bracket. Tighten the
bracket bolts to 10-12
lb-ft (14-16 Nm) torque.
2. After tightening the
bolts, revolve the
injector control tube
to be sure the return
spring pulls the in-
jector racks out (no-
fuel position) after
they have been moved
all the way in (full-
fuel position), since
the injector control
tube is mounted in
self-aligning bear-
ings. Tapping the
tube liqhtly will
remove any bind that may
exist. The injector
racks must return to the
no-fuel position freely
by aid of the return
spring only. Do not bend
the spring. If necessary,
replace the spring.
f. Fuel
Install.
Refer to para-
rods
g. Fuel
Connect.
lines
h. Thermo-
Install.
Refer to para-
stat
and
housing
i. Water
Install.
Refer to para-
mani-
fold
3-759


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business