| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-85. EXHAUST MANIFOLD-MAINTENANCE INSTRUCTIONS.
The one-piece, water cooled exhaust manifold is cast with an integral water jacket surrounding the exhaust
chamber. The diameter of the exhaust chamber increases uniformly from one end to the other where it terminates in a
flange to which an elbow and flexible exhaust connection is attached. A portion of the engine coolant is by-passed from
the water manifold into the rear end of the jacket surrounding the exhaust manifold and is discharged from the forward
end through a tube into the lower section of the expansion tank. A drain cock is installed in the bottom of the manifold for
draining the water jacket. A plug is provided in the bottom of the exhaust outlet elbow for draining moisture condensed
from the exhaust gases.
This task covers:
a. Removal
c.
Repair
b. Inspection
d.
Installation
INITIAL SETUP
Test Equipment
References
NONE
NONE
Equipment
Special Tools
Condition
Condition Description
Para
Torque Wrench
NONE
Material/Parts
Special Environmental Conditions
Gasket kit P/N 5193113 NONE
Personnel Required
General Safety Instructions
2
NONE
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1.
Exhaust
a. Drain
Open to drain water.
System
cock (1)
b. Pipe
Remove to drain water.
plug (2)
3-1414
|
||
|
||
