| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-15. FLYWHEEL HOUSING-MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
e. If the run-out exceeds
the maximum limits,
remove the flywheel
housing and check for
dirt or foreign mate-
rial, such as old
gasket material, be-
tween the end plate,
flywheel housing and
the new gasket end
plate, flywheel
housing and the new
gasket (and between
the end plate and the
cylinder block).
f. Reinstall the flywheel
housing and the
flywheel and tighten
the attaching bolts in
the proper sequence
and to the specified
torque. Then recheck
the run-out. If
necessary, replace the
flywheel housing.
8.
Lifter
a. Screws
Remove from flywheel
bracket
(17),
housing.
(3)
lock-
washers
(18) and
bracket
(3)
b. Gasket
Remove.
Discard gasket.
(19)
c.
Gasket
Affix new gasket to brac-
(19)
ket.
3-1602
|
||
|
||
