| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-96.4. CYLINDER LINER - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
NOTE
The numbers on the side of the connecting rod and
cap identify the rod with the cap and indicate the
particular cylinder in which they are used. If a new
service connecting rod is to be installed, the same
identification numbers must be stamped in the same
location as on the connecting rod that was replaced.
2. Push the piston and
connecting rod assem-
bly down into the
liner until the piston
is free of the ring
CAUTION
Do not force the piston into the liner. The peripheral abutment
type expanders apply considerably more force on the oil ring
than the standard expander. Therefore, extra care must be
taken during the loading operation to prevent ring breakage.
g. Connec-
1. Remove.
ting rod
cap and
2. Push piston down until
ring com-
the compression rings
pressor
pass the cylinder
liner ports.
3-1686
|
||
|
||
