| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-5
3-97.3. CRANKSHAFT SEALS. (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
8.
Front
a. Gasket
Shellac a new gasket to
cover
(8)
the bolting flange of
the front cover.
b. Oil
Coat the lip of the seal
seal
lightly with cup grease.
(10)
c. Two
Install.
Screws are -
screws
13 x 3 3/4 lg.
(5) and
lock
washers
(6)
d. Two
Install.
Screws are -
screws
13 x 2 1/4 lg.
(3) and
lock-
washers
(6)
e. Three
Install.
Screws are 3/8-
screws
24 x 3/4 lg.
(1) and
lock
washers
(2)
f. Screws
Tighten the cover attach-
(1, 3
ing screws by following
and 5)
the tightening sequence
shown. Follow this
sequence as the screws
are drawn up and then
tightened to their proper
torque to effect a good
seal between the mating
parts. Tighten the
3/8-24 screws to 25-30
lb-ft (34.1-41.0 Nm) and
the 1/2-13 screws to
80-90 lb-ft (109.2-122.9
Nm) torque.
9.
Flywheel
Replace the flywheel
Refer to para-
housing
housing and flywheel.
graph 3-92.
3-1722
|
||
|
||
