| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-117.
WINCH ASSEMBLY - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
NOTE
Hand brake must be disengaged to complete
disassembly or reassembly.
9.
Bearing
a.
Cable
1. Slide cable drum (17)
Place a wood
housing
drum
down speed reducer
support block
key
shaft (9) far enough
under cable
to install cable drum
drum.
key (18).
2. Slide cable drum (17)
Remove wood
back into place.
support block.
b.
Bearing
1. Install oil seal bear-
housing
ing (16), and seal
(8)
plate holder (15) onto
speed reducer shaft
(9).
2. Install bearing hous-
ing (8) onto speed
reducer shaft (9).
3. Install lockwashers
(14), capscrews (13)
onto seal plate
holder (15) and
bearing housing (8).
4. Install dowl pins
(12), lockwashers
(11), and capscrews
(10) onto bearing
housing (8).
c.
Bearing
1. Install bearing
roller
adapter (7) onto
(6)
bearing roller (6).
2. Install bearing roller
(6) and bearing adapter
(7) onto speed reducer
shaft (9) and into
bearing housing (8).
3-1990
|
||
|
||
