| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-123.2. HAND CRANK INTERLOCK LIMIT SWITCH - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
4.
Hand
a. Bottom
1. Install gasket (12).
crank
cover
inter-
2. Install bottom cover
Check alignment
lock
(11).
of screw holes.
limit
switch
3. Insert screws (10).
Hand tight only;
then torque to
10-15 in. lbs.
(1.138-1.706
Nm). Torque
screws in a
staggered
pattern (from
one side of
cover to the
other.
b. Wiring
1. Thread wiring thru
housing (13).
2. Connect wiring to
Remove tags.
contact block (9).
c.
Top
1. Install gasket (8).
cover
2. Install top cover
(7).
3. Insert screws (6).
Hand tight only;
then torque to
10-15 in. lbs.
(1.138-1.706
Nm). Torque
screws in a
staggered
pattern (from
one side of
cover to the
other.
3-2066
|
||
|
||
