| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-144. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (Cont)
b. Housing
1. Inspect for oil leaks.
2. Inspect for breaks,
dents, cracks or damage.
3. Inspect for loose
mounting hardware.
2.
Blower
a. Oil
Inspect for leaks, breaks,
drive
fill
and damage.
support
pipe
b. Housing
1. Inspect for breaks,
cracks and damage.
2. Inspect for leaking oil.
3. Inspect for tight hard-
ware.
c.
Hoses
Inspect for wear, breaks,
or defects.
d. Tubing
Inspect for breaks, bends,
or damage.
3.
Blower
(engine
running)
NOTE
The air intake (paragraph 3-143) must be removed to perform
the following inspections:
WARNINC
When inspecting a blower on an engine with the engine
running, keep fingers and clothing away from the moving parts
of the blower and run the engine at low speeds only.
3-2435
|
||
|
||
