| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-164.1. CYLINDER HEAD - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
CAUTION
Do not bend the fuel pipes and do not exceed the specified torque.
Excessive tightening will twist or fracture the flared ends of the fuel
pipes and result in leaks. Lubricating oil diluted by fuel oil can cause
serious damage to the engine bearings.
Injector
1. Set the injector con-
control
trol tube assembly in
tube
place on the cylinder
assembly
head and install the
attaching bolts finger
bolts. When position-
ing the control tube,
be sure the ball end
of each injector rack
control lever engages
the slot in the corres-
ponding injector control
rack. With one end of
the control tube, return
the spring hooked around
an injector rack control
lever and the other end
hooked around a control
tube bracket. Tighten
the bracket bolts to
10-12 lb-ft (14-16 Nm)
2. After tightening the
bolts, revolve the
injector control
tube to be sure the
return spring pulls
3-2719
|
||
|
||
