| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
3-164.2. FUEL INJECTOR TUBE - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
a. Hand
Ream the injector tube
for the injector nut and
spray tip. With the cyl-
inder head right side up
and the injector tube
free from dirt, proceed
with the first reaming
operation as follows:
1. Place a few drops of
Use tool J5286-
light cutting oil on
1.
the reamer flutes.
Then carefully posi-
tion the reamer in the
injector tube.
2. Turn the reamer in a
clockwise direction
(withdrawing the ream-
er frequently for re-
moval of chips), until
the lower shoulder of
the reamer contacts
the injector tube.
Clean out all of the
chips.
3-2728
|
||
|
||
