| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-6
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
c. Roll the idler gear
into position, align
the hollow pin with
the hole in the end
plate, and gently
tap the hub until it
seals against the
end plate. Thus the
hollow dowel pin in
the hub will conduct
oil through the end
plate and into the
hub where it flows
through a drilled
passage to the
roller bearing.
d. After making sure
Tighten the
that hub is tight
screw to 80-90
against the end-
lb. ft. (108.5-
plate, secure the
122 Nm) torque.
idler gear assembly
into place with a
1/2-13 inch screw
(1) and washer (2).
3-2813
|
||
|
||
