| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-7
3-171.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
d. Connecting
Place the upper end of
rod
the connecting rod be-
(3)
tween the piston pin
bosses and in line with
the piston pin holes.
e. Piston
Slide the piston pin into
pin
place. If the piston pin-
(10)
to-bushing clearances are
within the specified
limits, the pin will slip
into place without the
use of force.
f.
Piston
1. Place on piston;
Use tool
pin
then place crowned
J1513-4.
retainer
end of nstaller
(13)
against the retainer.
2. Place handle on
Use tool
installer.
J1513-2.
3. Strike the handle
just hard enough
to deflect the
retainer, and seat
it evenly in the
piston.
CAUTION
Do not drive retainer in too far or piston bushing may be moved
inward and result in reduced piston pin end clearance.
g. Piston pin
After the piston pin re-
(10), and
tainers have been instal-
connecting
led, check for piston pin
rod (3)
end clearance by cocking
assembled
the connecting rod, and
shifting the pin in its
bushings.
3-2914
|
||
|
||
