| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-7
3-210. STEERING SYSTEM - HYDRAULIC CYLINDER AND LINKAGE -
MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
ADJUSTMENT
17. Adjustable
a. Hydraulic
1. Remove cotter pin,
rods,
cylinders
slotted hex nut, and
threaded
washer attaching
rods,
cylinder to rudder
and
post.
Hydraulic
Cylinders
2. Manually move rudder
until it is aligned
parallel to the fore
and aft line.
3. Loosen setscrew and
adjust position of
rod end eye.
4. Reinstall rod end eye
and all hardware.
b. Adjustable
1. Remove cotter pins,
rod
slotted hex nuts and
washer attaching rod
to rudder post.
2. Manually move rudder
until it is aligned
parallel to the fore
and aft line.
3. Loosen locknuts and
rotate rod end eye.
4. Reinstall rod end
eye and all hardware.
NOTE
Make sure that all rudders are parallel to fore and aft line.
c. Threaded
1. Remove screws and
rod
flatwashers.
3-3260
|
||
|
||
