| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-1
4-56.
WATER MANIFOLD (Continued).
Location/Item
Action
Remarks
INSPECTION
1. Water
Inspect water manifold for
Manifold
cracks, breaks or other
damage or defects. Check
manifold at risers for leaks.
REMOVAL
2. Water
a. Drain the cooling system to
Manifold
a level below the water
manifold.
b. Loosen clamp (1), and remove
seal (2) between the water
manifold (3) and thermostat
housing.
c. Remove water manifold stud
nuts (4), and lockwashers (5)
from risers (6), and lift the
manifold off studs. Remove
and discard all gaskets.
INSTALLATION
3. Water
a. Install new gaskets and place
water manifold (3) on studs.
Secure with lockwashers (5),
and nuts (4).
b. Install seal (2) between
manifold and thermostat
housing. Tighten clamp (1).
c. Fill cooling system.
4-214
|
||
|
||
