| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-1
4-60. TRANSMISSION OIL COOLER. (Continued)
Location/Item
Action
Remarks
CLEANING (Cont)
action i s evidenced by
bubbling and foaming. The
process must be carefully
watched and, when bubbling
stops, (this usually takes
from 30 to 60 seconds), the
element should be removed
and thoroughly flushed with
clean, hot water. After
cleaning, dip the element
in light oil.
INSTALLATION
4. Oil Cooler
a. Install a new gasket (6) to
oil cooler housing (3).
b. Install a new gasket (7) to
the inner face of the oil
cooler cover (1).
c.
Install the oil cooler
element (2) into the cooler
housing with the matchmarks
previously placed on the
element and housing in
alignment.
4-252
|
||
|
||
