| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-1
4-64. BILGE PUMP (Continued).
Location/Item
Action
Remarks
DISASSEMBLY (Cont)
4. Bilge Pump
a. Remove drain plug (1), nut (2), washer (3), and then
separate the pump base body (4) from housing assembly (5).
NOTE
Item 5A is used on the left-hand driven pump.
b. Remove cotter pin (6), clutch handle shaft (7), clutch lever
(8), and clutch washer (9).
c. Remove shaft nut (10), washer clamp (11), snap ring (12),
ball bearing (13), and spacer (14), from pump base body.
d. Remove lock spring (15), and adjusting nut (16).
e. Remove clutch assembly (17), collar assembly (18), lever
(19), roller (20), key (21), plate (22), bearing (23),pulley (24), pressure plate
(25), short hub (26), and long hub (27).
f. Remove shim (28), nuts (29 and 30), slinger (31), gland
(32), packings (33 and 34), and packing gland stud(35)
from the pump base body. Discard all unserviceable packing.
4-267
|
||
|
||
