| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-1
4-64. BILGE PUMP (Continued).
Location/Item
Action
Remarks
REASSEMBLY
5. Bilge Pump
a. Install stud (41) into housing.
b. Install new gasket (40), shaft (39), impeller (38), pin (37) and key (36).
c. Install packing gland stud (35), packings (34 and 33),
packing gland (32), slinger (31), nuts (30 and 29), and shim (28).
d. Install clutch assembly (17), including long hub
(27), short hub (26), pressure plate (25), pulley
(24), bearing (23), plate (22), key (21), roller (20),
lever (19), and collar assembly (18).
e. Install adjusting nut (16), and lock spring (15).
f. Install spacer (14), ball bearing (13), snap ring
(12), washer clamp (11), and shaft nut (10) into
pump base body.
g. Install clutch washer (9), clutch lever (8), clutch
handle shaft (7), and cotter pin (6).
h. Join the pump base body (4) to the housing (5), and
secure with washer (3), and nut (2). Install drain plug (1).
4-269
|
||
|
||
