| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-5.1.
HYDRAULIC STEERING PUMP (Continued).
LOCATION/ITEM
ACTION
REMARKS
REPAIR/OVERHAUL (Cont)
d. Remove ridges, burrs, or
nicks from sealing surfaces
of mounting surfaces of
cover and pump body by
lapping.
e. Replace defective bearings.
f.
Replace other defective
parts as required.
ASSEMBLY
5. Steering
a. Install body alignment pins
If removed
Pump
(19) in pump body (7).
b. Insert shaft seal (18) over
Use new seal.
end of pump shaft (10).
c.
Install bearing (17) flush
with shaft seal.
d. Insert end of shaft (10)
into pump housing and
install bearing (16) onto
other end of shaft.
e. Secure assembled unit (15)
in body (7) with retaining
ring (14).
1A
14
6-26
|
||
|
||
