| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-5.3
STEERING CYLINDERS (Continued)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY (Cont)
f.
Install preformed packing (24),
Use new
piston ring packings (23), pis-
packings.
ton (22), onto piston rod (9)
and secure with lockscrew (21).
g. Install cartridge seal packing
Use new
(19), retaining ring (18), and
packing.
end cover packing (29) in head
cover (20).
h. Install head cover (20) on
piston rod (9).
i.
Install rod packing (17) and
Use new
secure with retaining ring (16).
packing.
j.
Install piston rod bearing (15),
Use new
rod wiper (14) and bearing cart-
bearing and
ridge (13).
wiper.
k.
Install cartridge retainer plate
(12) on head cover (20).
l.
Install cylinder (10) and piston
rod (9) assembled into end cap
cover (11).
m. Secure with tie rod nuts (8).
n. Install cushion needle packing
(7) and cushion needle (6) in
end cap cover (11).
o. Install cartridge slug (5) and
setscrew (4) in cartridge
retainer plate (12).
p. Install ball bearings (3) and
bleeder screws (2) in cylinder'
(10).
q. Install clevis (1) onto piston
Use flats on
rod (9).
piston rod.
6-38
|
||
|
||
