| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-12.
WINCH (Continued)
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
6. Gear Reducer
a. Remove shaft retainer mounting
capscrews (53), lockwashers
(54), shaft retainer (55),
and gasket (56).
b. Remove shaft retainer cap
screws (53), lockwashers (54),
shaft retainer (57), and gasket
(56).
c.
Remove idler gear cluster shaft
(58), and cluster driving gear
(59) as an assembly.
d. Remove retaining rings (60)
and drive gear roller bearings
(61).
e. Remove flange mounting capscrews
(62) and lockwashers (63).
f.
Remove case flange (64), gasket
(65), drum shaft (66) and spur
gear (67).
g. Remove gear spacer (68), oil
seals (69 and 70), drum shaft
ball bearing (71), and drum
shaft (66) assembly.
h. Remove screws (72) and ball
bearing (73).
i.
Disassemble gear retaining
rings (74), spur gear (67), and
drum shaft (66).
j.
Remove screws (75), lockwashers
(76) and idler gear shaft
retainer (77) and gasket (78).
k.
Remove idler cap (79).
l.
Remove packing (80) from idler
cap (79).
6-126
|
||
|
||
