| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-14.
ANODES AND PLATING (Continued)
LOCATION/ITEM
ACTION
REMARKS
INSPECTION
1. Anodes
a. Inspect anodes for loose
mounting and missing
hardware.
b. Inspect for deterioration
and corrosion.
c.
Insure that anodes have
not wasted away to the
point that they fail to
provide adequate mass
and surface area.
SERVICE
2. Anodes
a. Remove corrosion with a
wire brush.
b. Tighten loose hardware.
REMOVAL
3. Anodes
a. Remove mounting nuts (1)
and washers (2) (if
used) from anodes.
b. Remove anodes (3) from
hull (4).
REPAIR
4. Anodes
Replace damaged or defective
anodes as required.
6-147
|
||
|
||
