| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-21.
HYDRAULIC STARTING MOTOR (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSPECTION/OVERHAUL (Cont)
d. Motor barrel (6).
(1)
Examine the potted face
of the cylinder for
scratching or scoring.
(2)
Slight scuff marks can
be removed by lapping on
a surface plate.
(3)
The bores of the cylinder
should be smooth and
free of scoring.
e. Pistons (7).
(1)
The diameter of the
pistons (7) should be
smooth and free of
scoring.
(2)
The closed end of the
pistons may show brinnel-
ling where they contact
the thrust bearing plate
(8), but no burrs or
flat spots are permissible.
f.
Shaft (9).
(1)
Check the ends of the
shaft for wear or scoring.
(2)
The splines should be
smooth and free of nicks.
(3)
Check the bearing (10)
and replace if necessary.
g. Seal assembly (11).
(1)
Replace seals (12 and
13).
6-230
|
||
|
||
