| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-23.1.
GEAR TRAIN AND ENGINE TIMING (Continued).
(17) Note the reading on the dial indicator and compare with the following:
-- if the indicator reading is .223" to .233", the engine is in time.
-- if the indicator reading is .188" to .204", timing is one tooth retarded.
-- if the indicator reading is .249" to .257", timing is one tooth advanced.
After completing the timing check, remove the dial indicator. Remove the shipping caps from the injector, and install
the injector fuel lines, making sure that they are tightened to prevent any leaks.
Remove the pointer attached to the front of the engine. Adjust the exhaust valves and time the injectors as outlined
in paragraph 5-14.
Install the cylinder head rocker cover.
Refer to the following:
Camshaft and Balance Shaft Gears
Idler Gear and Bearing
Crankshaft Timing Gear
6-322
|
||
|
||
