| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-23.2.
BALANCE WEI GHTS AND COVER (Continued)
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
5. Balance
a. Apply heavy cup grease to the steel
Weights
faces of the thrust washers ("B"
engines), and set the washers up
against the camshaft and balance
shaft bearings.
b. Install Woodruff keys (14) in the
keyways at the front end of the
camshaft and the balance shaft.
c.
Align the keyway in the balance
weight (13) hub with the key (14)
in the shaft and slide the balance
weight on the camshaft.
d. Slide the balance weight (13) on
the balance shaft. Slip the
internal tooth lockwashers (12)
over the end of each shaft. Start
the nuts (11) on both shafts.
e. Place a block of wood between the
balance weights as shown and
tighten the nuts to 300-325 lb-ft
(406.7-448.6 Nm) torque.
6-329
|
||
|
||
