| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-23.3.
CAMSHAFT AND BALANCE SHAFT - MAINTENANCE INSTRUCTIONS.
(Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL - FLYWHEEL HOUSING AND MARINE GEAR REMOVED (Cont)
b. Remove flywheel and flywheel
Refer to para-
housing.
graph 6-40.
c.
Remove water pump.
Refer to para-
graph 5-27.
d. Remove front balance weight
Refer to para-
cover.
e. Remove screws (1), lockwashers
(2), and nut retaining plate (3).
f.
Wedge a clean rag between
A block of wood
gears. Remove nuts (4), and
can be placed
lockwashers (5) from both
between the
ends of camshaft.
balance weights.
g. Remove setscrew (6) and interme-
diate bearings (7).
h. The three screws (8), and lock-
washers (9) that secure the
camshaft bearings to the rear end
plate of the engine may be removed
by inserting a socket wrench
through the hole in the webs of
the camshaft drive gears (10).
6-335
|
||
|
||
