| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-23.3. CAMSHAFT AND BALANCE SHAFT - MAINTENANCE INSTRU CTIONS
(Continued).
LOCATION/ITEM
ACTION
REMARKS
INSPECTION (Cont)
operate at high (2300 rpm)
speeds. The inside diameter
of the bushings must be square
with the rear face of the
bearing with .0015 inch total
indicator reading, and concen-
tric within the outside diameter
of the bearing retainer within
.002 inch total indicator
reading. The bushings must
project from .045 to .055 inch
(0.114 to 0.140 cm) from each
end of the bearing.
6-351
|
||
|
||
