| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-23.3. CAMSHAFT AND BALANCE SHAFT - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY
6. Camshaft
a. Install new end plugs (34
and Balance
and 35) in the camshaft.
Shaft
b. Apply grease to the steel
face of end thrust washers.
Then, place a thrust
washer (16 and 30) against
each end of the cam and
balance shaft rear bearings
(15 and 29) ("D" engines).
The steel faces of the
thrust washers must be
towards the bearing.
c.
Lubricate the rear cam and
balance shaft journals and
slide the rear bearings
(15 and 29) on each shaft
with the mounting flange
of the bearing toward the
gear end of the shaft.
d. Install the gears (10 and
24) on the shafts as
outlined in paragraph
3-27.4.
e. Lubricate the camshaft
intermediate bearing
journals. Then, place the
two halves of each inter-
mediate bearing (7) on the
camshaft journal and lock
the halves together with
the two lockrings (33).
Install each lockring with
the gap over the upper
bearing and the ends on
equal distance above the
split line of the bearing.
6-353
|
||
|
||
