| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-23.3. CAMSHAFT AND BALANCE SHAFT - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION - FLYWHEEL HOUSING AND MARINE GEAR REMOVED (Cont)
e. Install the front end bearing
(12) (and thrust washers (11)
"B" engines). Install screws
(13), and lockwashers (14).
Tighten screws to 35-40 lb-ft
(47.5-54.2 Nm) torque.
CAUTION
Apply grease to the steel faces of the thrust washers and insure that the steel faces are
towards the bearing.
f.
Install the balance weight on
the front of the camshaft,
paragraph 3-27.1.
g. Start the balance weight
retaining nut (4), and lock-
washer (5) on the camshaft.
Place a wood block between
the balance weights. Tighten
the gear retaining nut; then,
tighten the balance weight
nut to 300-325 lb-ft (406.7-
448.6 Nm) torque.
6 -364
|
||
|
||
