| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-26.1.
LUBE OIL PUMP ASSEMBLY - MAINTENANCE INSTRUCTIONS
(CONTINUED).
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
i.
Remove screw (30), lockwasher
(31), and idler gear washer
(32).
j.
Remove idler gear (33).
k.
Remove headless pin (34).
If necessary
l.
Remove bushing (35).
Discard if
damaged.
m. Clamp pump body (14) in vice.
Use gear puller
Remove driven gear (36),
J8174. Discard
and woodruff key (37) from
gear, shaft and
shaft (38).
key.
n. Remove shaft (38) and drive
Discard if
gear (39) from body (14) as
disassembly is
an assembly.
required. Refer
to step q.
o. Remove screw (40), and idler
gear support (41).
p. Remove dowel pin (42).
If necessary
q. Position drive gear (39),
The drive gear,
shaft (38), and woodruff key
key and the
(43) on bed of arbor press
shaft are part
with long end of shaft
of the overhaul
extending down through slot
kit.
in bed plate and with the
face of the gear resting on
the plate. Place a short
1/2 inch round steel rod on
the end of the shaft. Press
the shaft from the gear.
r.
Remove bushings (44).
Discard.
6-399
|
||
|
||
