| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-26.1.
LUBE OIL PUMP ASSEMBLY - MAINTENANCE INSTRUCTIONS
(CONTINUED).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY
4.
a. Press bushings (44) into
Use new bushings.
body (14).
b. Insert woodruff key (43) in
Use new gear,
shaft (38). Apply a light
key and shaft.
coat of engine oil to the
shaft. Start the shaft
squarely into the bore of
the gear (39). Press shaft
into gear using an arbor
press. The gear must be
6-15/16 inches from the
keyway end of the shaft.
c.
Install dowel pin (42).
If removed
d. Install idler gear support
(41), and screw (40).
e. Install drive gear (39), and
shaft (38) assembly in body
(14).
f.
Position driven gear (36) and
Use new gear,
woodruff key (37) on the end
key and shaft.
of the shaft (38) with the
extended hub side up away
from the body. Insert a .005
feeler ribbon between the gear
and the body. Press the gear
on the shaft until the clear-
ance is .005 between the body
and the gear.
g. Install bushing (35).
Use new bushing.
h. Lubricate idler gear (33)
with engine oil. Install
with flat side facing the
support (41).
6-403
|
||
|
||
