DISASSEMBLY - TM-55-1905-221-14-30452

Custom Search

INSPECTION (Cont)

TM-55-1905-221-14-3 Landing Craft Mechanized Steel DED Overall Length 74 Feet Mod 1 Mark VIII Navy Design LCM-8 Manual

DISASSEMBLY (Cont)

TM 55-1905-221-14-3

6-27.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Continued).

LOCATION/ITEM

ACTION

REMARKS

DISASSEMBLY

7. Bushings

Clamp under end of

Use tools

connecting rod (3) in

J7632, J1513-2,

holder, so that bore

and J1513-3

in the bushings is

when installing

aligned with the hole

bushings on

in the base of the

connecting rod.

holder. Place bushing

remover in the con-

necting rod bushing.

Insert handle in the

remover and drive the

bushings (9) from the

rod (3).

8. Spray

a. Remove connecting

Refer to step

Nozzle

rod bushings (9).

(8)

b. Insert spray nozzle

Use tool J8995.

remover through

the upper end of

the connecting rod

and insert the

pin, in the

curved side of the

tool, in the

opening in the

bottom of the

spray nozzle (8).

Support the

connecting rod and

tool in an arbor

press. Place a

short sleeve

directly over

the spray nozzle.

Then press the

nozzle out of

the connecting

rod. Remove the

tool.

6-444