| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-27.2. CONNECTING ROD - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
12. Bushings
a. Clamp upper end of connecting
Use tool J7632.
rod (3) assembly in holder.
Align the bore
of the bushing
with the hole
in the base of
the tool.
b. Start a new bushing (9) straight
Use installer
into the bore of the connecting rod,
tool J1513-6,
with the bushing joint at the top of
and handle tool
the rod. Insert installer in bushing,
J1513-2.
Then insert handle in the installer.
Drive the bushing in until the flange of
the installer bottoms on the connecting
rod.
c.
Turn the connecting rod (3) over
in the holder and install the
second bushing in the same
manner.
NOTE
The bushings must withstand an end load of 2000 pounds (907 kg) without moving
after installation.
6-448
|
||
|
||
