| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-27.3. CONNECTING ROD BEARINGS - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION (Cont)
a. Install the upper
bearing shell (4) (the
one without the contin-
uous oil groove) in the
connecting rod. Be sure
the tang on the bearing
shell fits in the groove
in the connecting rod.
b. Wipe crankshaft journal
clean and lubricate with
clean engine oil.
c.
Pull connecting rod and
piston assembly down
until the upper bearing
seats firmly on the
crankshaft journal.
d. Assemble bearing cap (2)
Note the number
and lower bearing shell
stamped on the
(5).
connecting rod
and the bearing
cap and install
the lower bear-
ing shell (the
one with the
continuous oil
groove) in the
bearing cap,
with the tang
on the bearing
shell in the
groove in the
bearing cap.
e. Install bearing cap (and
Torque to 60-70
lower bearing shell
lb-ft (81-95 Nm)
assembly) (2) and nuts
torque (lubrite
(1).
nut) or 65-75
lb-ft (88-102 Nm)
torque (castel-
lated nut).
6-462
|
||
|
||
