| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-27.4. CYLINDER LINER - MAINTENANCE INSTRUCT IONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL (Cont)
c.
Remove lube oil pump.
Refer to para-
graph 6-26.1.
d. Remove cylinder head.
Refer to para-
graph 5-15.
e. Remove piston.
Refer to para-
graph 6-27.1.
2. Cylinder
Liner
NOTE
It is very important that the proper method is followed when removing a cylinder
liner. Do not attempt to push the liner out by inserting a bar in the liner ports and
rotating the crankshaft, otherwise the piston may be damaged or the upper ring
groove may collapse.
a. To remove the cylinder liner
proceed as follows:
(1)
Remove bolt (A), and
Use tool
lower shoe (B) from
J1918-02.
shaft (C).
(2)
Lower the lower shoe
through the cylinder
liner.
(3)
Lower the shaft (C) into
the cylinder liner.
(4)
Attach lower shoe (B) and
bolt (A) to shaft (C).
Place the shoe on the
bottom edge of the liner
with the flat on the
shoe parallel with the
crankshaft bore.
6-466
|
||
|
||
