| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-3
6-28.3.
CRANKSHAFT SEALS - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Power
Remove power take-off adapter
Take-off
as per paragraph 3-41.
Adapter
2. Crankshaft
Remove front cover as per
Front Cover
paragraph 3-45.
3. Oil Seal
a. Drive the oil seal (1) out
Discard oil seal.
(Front)
of front cover. Clean seal
bore in the front cover.
b. Remove spacer (2) and
woodruff key (3).
c.
Remove oil slinger (4).
NOTE
When necessary, an oil seal may be removed without removing the front cover or
flywheel housing. This may be done by drilling diametrically opposite holes in the seal
casing and threading metal screws, backed by flatwashers, into the casing. Remove the
seal by prying against the washers with pry bars.
4. Oil Seal
a. Remove flywheel and flywheel
Refer to
Rear
housing.
paragraph 6-40.
b. Drive the oil seal (5) out
of the flywheel housing.
Clean the seal bore in the
flywheel housing.
6-505
|
||
|
||
