| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-29. CYLINDER BLOCK - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION/ITEM
ACTION
REMARKS
INSPECT (Cont)
(3) Start the hone and
"feel out" the bore
for high spots which
will cause an
increased drag on
the stones. Move
the hone up and
down the bore with
short, overlapping
strokes about 1 inch
(2.54 cm) long.
Concentrate on the
high spots in the
first cut. As these
are removed, the
drag on the hone
will become lighter
6-527
|
||
|
||
