Custom Search
TM 55-1905-221-14-4
6-31. FUEL INJECTORS (Continued).
Wear protective eye goggles when using compressed air to prevent eye injury.
b. Wash all of the parts with
clean fuel oil and dry them
with clean, filtered com-
pressed air. Do not use
waste or rags for cleaning
purposes. Clean out all of
the passages, drilled holes
and slots in all of the
injector parts.
c. Carbon on the inside of the
spray tip may be loosened
for easy removal by soaking
for approximately 15 minutes
in a suitable solution prior
to the external cleaning and
buffing operation. Methyl
Ethyl Ketone solution is
recommended for this purpose.
d. Clean the spray tip with
tool J9464-01.


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business