| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-221-14-4
6-34. ENGINE SPEED GOVERNOR (Continued).
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (Cont)
2. Governor
a. Place governor control housing
Control
(22) in a soft-jawed vise.
Housing
b. Remove cap screws (23), lock-
washers (24), high speed
spring housing (25), and
gasket (26) from control
housing (22).
c. Loosen locknut (27)', then
remove high speed spring
retainer (28), hex nut (29),
adjusting screw (30), high
speed adjusting spring (31),
plunger (32), low speed
spring seat (33), low speed
spring (34), and retainer
(35) .
d. Remove retainer (36) and flat
washer (37) from differential
lever (38).
e. Remove differential lever
Remove pin (39)
(38).
from differen-
tial lever (38),
if damaged.
f. Remove expansion plug (40)
from housing (22).
g. Remove bearing retainer screw
and lockwasher assembly (41)
and flatwasher (42).
h. Remove operating fork setscrew
(43).
i. Support control housing in
bed of arbor press as shown.
6-608
|
||
|
||
